AXEON NF3-2514 200 GPD Membrane Element
Categories: Reverse Osmosis Membranes
AXEON NF3-2514 200 GPD Membrane ElementThe fundamental principle of Nanofiltration membrane's technology is the use of pressure to separate soluble ions from water through a semi permeable membrane. The membrane, operates under a different hydraulic profile which is also known cross flow filtration, unlike a dead end filter. Most Nanofiltration membranes are composite materials supported by polymer substrate and manufactured in a spiral design as opposed to a flat sheet or tube geometry. The predominant model used today for industrial applications is the spiral configuration. Nanofiltration (NF), in water treatment, “bridges” a gap between UF and RO membranes. It is sometimes referred to as a loose or lower rejecting RO membrane. It could also be called a tight UF, as NF membrane pore size ranges from .01 to a little less than .001. Generally, an NF membrane system lets more salt pass than an RO membrane. In addition, an NF membrane element will produce the same quantity of product at 50 to 70% the applied pressure as an RO water treatment system. There are applications where a 75% rate of salt rejection is preferable to 95 to 99%, especially when it is achieved using only half of the energy. Unlike with RO membrane elements, the NF offerings of the major membrane manufacturers are quite different in performance from company to company. With RO membrane elements, any model with less than 99.5% sodium chloride rejection, especially with seawater membranes, is considered inferior. In the case of NF, there is a “place” for any membrane with a NaCl rejection rate of 40%, or more. Nanofiltration has also been called a “softening” membrane as while its salt rejection may be 80% or less, hardness rejection will often remain well over 90%. Like RO, and unlike UF, a Nanofiltration Systems will recover a percentage of the feed water. Most all NF membranes are of a spiral wound configuration. Other applications of nanofiltration are: • The removal of heavy metals from wastewater • The removal of pesticides from groundwater • Wastewater recycling in laundry facilities • Water softening • Nitrate removal AXEON NF3-2514 Series Nanofiltration Membranes operate at pressures as low as 70 psi and reject 40-50% of dissolved solids. AXEON NF3-2514 elements are available in all standard commercial sizes, feature a protective ABS shell and are 100% vacuum integrity tested. The polyamide thin-film used in the AXEON NF3 Series membranes is manufactured by a major US membrane film manufacturer.
- Permeate Flow Rate: 200 gallons per day
- Membrane Type: Polyamide Thin-Film
- Applied Pressure: 70 psi
- Dimensions: 2.5" x 14"
- Minimum Concentrate Flow Rate: 5:1
- Chlorine Tolerance: 0 ppm
- Maximum Operating Temperature: 113° F
- Applications: Nanofiltration
- MgSO4 Reduction: 98%
- Formerly known as RO UltraTec NF3-2514